Bradford · Leeds · West Yorkshire
A clear starting point
for your project.
Guide prices for joinery, kitchen fitting and structural alterations. Tell us what you have planned and we’ll provide a written quotation for your specific scope.
Prices below are labour only. Materials, deliveries, waste disposal, specialist trades and professional fees are quoted separately unless expressly included in your written quotation.
Starting prices apply to the straightforward scopes described. Final prices depend on measurements, condition and access. PL Carpentry is not currently VAT registered; no VAT is added to our quoted prices.
Door fitting
| Door type | Single door | 3+ doors* |
|---|---|---|
| Standard hollow core | £85 | £75 each |
| Solid core | £100 | £90 each |
| Oak veneer | £110 | £100 each |
| Glazed internal | £120 | £110 each |
| Solid timber | From £130 | Ask for a quote |
| Double internal doors | From £200 / pair | Ask for a quote |
| FD30 / FD30S fire doors | Survey & tailored quotation | |
| External doors | Survey & tailored quotation | |
Multi-door prices apply to three or more doors of the same type at one property in one booking. Mixed types quoted individually. Standard prices assume a suitable existing frame. Fitting includes permitted trimming, hanging and fitting customer-supplied standard hinges, handle and latch. New frames, repairs, specialist locks, decoration and disposal are extra.
Finishing joinery
| Service | Guide price | Starting-price scope |
|---|---|---|
| Internal door, lining & architraves | From £220 / opening | One standard single internal door with new lining and architraves in a prepared opening. Components supplied by customer. Wall repairs excluded. |
| Skirting boards | From £10 / metre | Standard MDF on prepared walls. Minimum fitting charge £150. Materials, removal and decoration excluded. |
| Architraves | From £60 / opening | Both sides of one standard single doorway. Customer-supplied MDF. Minimum standalone visit £110. |
Flooring & fitted storage
| Service | Guide price | Starting-price scope |
|---|---|---|
| Straight-lay laminate flooring | From £18 / m² | Clear room with a dry, level, prepared subfloor. Minimum fitting charge £250. Underlay, trims, uplift, levelling and skirting work priced separately. |
| Click SPC / LVT flooring | From £22 / m² | Straight-lay click system on a suitable prepared subfloor. Minimum fitting charge £300. Glue-down products and preparation quoted separately. |
| Herringbone flooring | From £35 / m² | Standard click herringbone layout on a suitable prepared subfloor. Minimum fitting charge £450. Borders, levelling and glue-down systems quoted separately. |
| Flat-pack wardrobe assembly | From £180 / unit | One new, standard two-door flat-pack wardrobe, complete components on site and clear working space. Sliding doors and fitted adaptations quoted separately. |
| Bespoke MDF wardrobe | From £1,000 / unit | Labour for one simple built-in unit up to 1.5 m wide, 2.4 m high and 0.6 m deep, with plain hinged doors, shelf and hanging rail. Materials, drawers and painted finish excluded. |
| Decorative MDF wall panelling | From £35 / m² | Simple applied shaker-style strips on a sound wall, measured over the treated wall area. Minimum fitting charge £300. Materials, wall repairs and painting excluded. |
Kitchens & partitions
| Service | Guide price | Starting-price scope |
|---|---|---|
| Small kitchen fitting | From £1,500 | Up to eight pre-assembled standard cabinets, doors, plinths and fillers in a prepared room. Worktops, removal, appliance connections, electrics, plumbing and decoration excluded. |
| Laminate worktop installation | From £300 | Up to two runs, one standard joint and two cut-outs on level, fixed cabinets. Worktops, removal and appliance or sink connections excluded. |
| Stud partition with plasterboard | From £40 / m² | Straight partition up to 2.4 m high, frame and one board layer each side. Measured as length × height once. Minimum labour charge £450. Materials, insulation, skim, openings and rated systems excluded. |
| Kitchen removal | From £400 | Up to eight standard cabinets and laminate worktops, after services have been safely disconnected by the appropriate trades. Disconnections and waste disposal quoted separately. |
Structural alterations & renovations
| Service | Guide price | Starting-price scope |
|---|---|---|
| Non-load-bearing partition removal | From £450 | Labour to remove one straightforward plasterboard stud partition up to 3 m × 2.4 m, after its non-load-bearing status and services are confirmed. Waste and making good excluded. |
| Steel beam installation | Labour from £1,500 | Installation labour only for one straightforward accessible ground-floor beam under an agreed engineer’s design. Not a complete wall-removal price. Steel, demolition, support-system hire, lifting equipment, materials, making good and fees quoted separately. |
| Load-bearing wall removal & steel | Survey & quotation | Itemised project quotation after review of the engineer’s design, temporary works, access, services, fire protection, waste and making-good requirements. |
| French door opening & fitting | Survey & quotation | Opening, structural support, fitting and internal/external making good priced to the property and door specification. Door supply identified separately. |
| Full or partial house renovation | Package quotation | Scope, materials and programme agreed room by room. Electrical, plumbing and other specialist works separately identified in the quotation. |
Planning several jobs together?
Ask for a combined quotation. Where shared visits, setup and a continuous programme reduce our costs, we can reflect those savings in your package price. Preferential rates are available for returning customers, landlords and ongoing property maintenance. Ask for a tailored quotation. Discounts are not automatically combined.
Request your quotationSend photos on WhatsAppBefore we quote
What should I send?
Send your postcode, photographs, approximate measurements, preferred finish and a list of the work you need. For kitchen or structural projects, include any plans, appliance specifications and engineer’s drawings you already have.
Is a starting price a fixed quotation?
No. It is a guide for the stated straightforward scope. We confirm the work, inclusions, exclusions and price in writing before you book. Any additional work is priced and agreed before it proceeds.
How are structural and specialist works priced?
Structural work is assessed against the engineer’s design and project requirements. Engineer and Building Control fees, service alterations and specialist testing or certification are separately identified. Concealed beams, complex support arrangements and changes to foundations require a project-specific quotation.