Load-bearing wall removal
Opening up internal rooms in line with the approved structural design.
STRUCTURAL ALTERATIONS · BRADFORD & WEST YORKSHIRE
Wall removal & RSJ installation.
Transform the way you use your home. Structural openings, temporary support and steel beam installation — carried out to the structural engineer’s design and subject to the applicable Building Control process.
Engineer-designed steelTemporary works planningFinishing & making good
OUR STRUCTURAL WORK
01 / REMOVAL
02 / STEEL
03 / SPACE
04 / FINISHING
Opening up spaces. Safely and carefully.
From the initial survey to finishing around the new opening, every stage has a purpose. The structural engineer’s calculations determine the required steel and bearings; temporary works are project-specific.
RSJ & beam installation
Installing specified beams and bearings to the engineer’s details.
Kitchen & lounge knock-throughs
Creating more connected spaces with careful planning and coordination.
Making good
Plaster, ceiling, joinery and flooring finishes around the opening.
A REAL PL CARPENTRY PROJECT
What the work looks like on site.
Temporary propping & structural steel
This is our own site photograph from a wall removal project. The image shows temporary support during structural alteration, with steel visible above the opening.
The engineer determines the final steel specification and temporary-works requirements for each job.
Discuss a wall opening →THE PROCESS · STEP BY STEPFrom site visit to
From site visit to
Building Control sign-off.
See seven illustrative stages of opening up a load-bearing wall. The technical drawing animates the measurements, temporary supports and steel installation. Every actual opening is designed for its specific loads, dimensions and Building Control requirements.
Survey & assess
Planning the installation.
Educational animation only. No actual beam size, bearing length, propping layout or structural load can be determined from this diagram. Follow the structural engineer’s design, appropriate temporary works and applicable Building Control procedures.
STEP 07 / BUILDING CONTROL
Building Control sign-off
The final inspection and completion documentation are handled through the applicable Building Control process. This illustration describes the usual stage; it is not a claim that this particular photographed job has been certified.
Ask about structural work →COMMON QUESTIONS
Before you take a wall out.
Every property is different. Here are the practical questions to discuss before work begins.
Do I need Building Regulations approval?
Structural alterations often require Building Regulations approval. The relevant Building Control body can confirm the process for your project.
Who designs the steel beam?
A structural engineer specifies the steel, bearings and load-bearing details for the specific property. We do not size beams from photographs.
What about temporary supports?
Temporary works must be safely designed and installed for the actual conditions before structural elements are removed.
How long will the work take?
It depends on the structural design, access, services, inspections and the amount of making good. We confirm an estimate after assessing the scope.
What determines the price?
Opening width, steel specification, access, temporary works, engineering, Building Control requirements and finishing all affect the cost.
SERVING WEST YORKSHIRE
Structural alterations near you.
FREE QUOTATION
Thinking of taking a wall out?
Tell us your postcode, what you’d like to open up and send clear photos of both sides of the wall. We’ll discuss the next steps and provide a tailored quotation.